Homepage Cyberwar Cybersecurity Cyberspace C-Spionage C-Sabotage Gefährdung Kriminalität Computer Kommunikation mod. Systeme Der Mensch Beratung Bildung Fachberichte Information Kryptologie Emission Verschlüsselung Forschung Begriffe Recht Technik Verschiedenes
.R F I D  - Systeme   Verschlüsselungs- und Chiffriertechnik   Rotorsysteme   Computerkryptologie
131B-2 Python
Ansicht
Deutsch
Information
aus CRYPTO MACHINE
more information
131B-2 Python
DR CRYPTO "DR" <darwin_maring(at)hotmail.com> provides an opening submission for this device.

"The B-2 machine, known as Python, was an enormous square box, filled with relays was used with one-time tape. On this tape were a series of keys. Keys were composed of groups of random Baudot characters. At any given time, there were only two of these one-time tapes in existence, worldwide. The transmit tape and the receive tape had a number printed with an arrow every so many characters. That would delineate the beginning of a new key.

The transmitting operator would inform the receiving operator which key to use. As an example, the operator would type "Set 32" in plain text, then both ends would put the arrow associated with the number 32 on the set mark on the tape reader head. After a pause of several minutes the transmitting operator would start typing the plain text to be encrypted. If another circuit was available, it would be reserved for plain text order messages. In this scenario, after the tapes were mounted in the right spot, the receiving operator would send "32 Set" and communications would commence on the secure line. Besides using the keyboard, messages could also be provided in the form of punched paper tape thus resulting in faster transmission time.

The key tape was provided on a really large reel akin to a movie reel, and there was no limit on the length of the message. If the tape ran out, operators would simply SET an new tape. When plain text messages were provided on punched paper tape, it was mounted on a reader with a dual head. The plain text and key tape would be read simultaneously to produce the encrypted traffic.

To encrypt, modulus 2 was added without the carry to the character which was typed and it incremented each time a new letter was typed or a character read by a plain text tape reader. At the far end, modulus 2 was added without the carry and the result was plain text. It was very simple encryption and robust because there are no prime numbers or any other set of numbers to generate it. It was strictly random key and only 2 one-time tapes.

Because this machine was designed before the days of TEMPEST, no consideration was given to the suppression of electrical noise emitted by the relays in the B-2 and the taut heads (tape readers). Technology eventually progressed to the point where the B-2's electrical emissions could be read at some considerable distance thus hastening its service life.

The section corresponds Tempest "not true. The NSA documents show the opposite. You find an excerpt on the following pages.

 

The SSM33 was a newer version of the B2 table. It consisted of a gray box about the size of a desktop computer with the old black B2 type of tape reader / punch sitting next to it. It was used by non-American troops in Viet Nam ".



George Mace recalls his experiences with the B2 Table. "The first and only B-2 Table I ever saw and worked on as a maintenance technician was in the Joint Services Communications Center on "FRED" Island, Eniwetok Atoll during the 1958 Nuclear Weapons Tests. It was in fact a large oak desk, similar to those used by executives during WW-II. The Teletype printers and transmitter/distributors (TDs) sit on the desktop. One TD for the clear text traffic and one TD for the Crypto One Time tape.