
|
Towards the end
of WWII, the German Army made several attempts to increase the
cipher security of the Enigma
machine. Well known examples of such attempts are the
field-rewirable reflector
UKW-D and the
Enigma Uhr. A far better improvement however, was the
Lückenfüllerwalze. |
|
The
Lückenfüllerwalze (Eng: gap-filling wheel) featured 26
user-configurable notches and allowed the number and position of the
notches of each wheel to be changed frequently. The Lückenfüllerwalze was planned to be used in combination with UKW-D, but like UKW-D and the Enigma Uhr it came too late and could not be distributed effectively among the users in the field. The Lückenfüllerwalze was also called Wahllückenwalze (selectable gap wheel). Its name is sometime erroneously written as Luckenfullerwalze (Without dots on the 'u'). |
|
|
The American Target Intelligence Committee (TICOM) [2] confiscated many cryptographic secrets, including the Lückenfüllerwalze immediately at the end of WWII and kept it under wraps for many years. If it had been produced in quantity and used in the field, it might have defeated the Allied code breakers at Bletchley Park. |
|
At the
Enigma Reunion 2009 at Bletchley Park in September 2009, we were
able to make some detailed pictures of this extremely rare
configurable notch wheel that is part of the collection of the NCM
[1]. As becomes clear from this picture, the wheel has the same dimensions as (and is compatible with) a standard Enigma wheel. Most standard wheels only have a single triangular gap. Once the wheel has made a full revolution, the wheel to the left of it makes a single step. This is called: regular stepping. |
|
|
The three extra Naval wheels (VI, VII and VIII) each have two such gaps (often called notches), but these appeared not be very effective as their number (2) is not a relative prime of 26 and they are located exactly opposite each other, which effectively halves the cipher period. |