Key wheels II
In order for these key wheels at all, they have to be "wired". This
means nothing else, the dome and the pins must be connected together
electrically.
This wiring is done according to fixed rules, laid down by each country
for itself.
That does not mean that all wheels produced key will be the same
algorithm. Including systems were in use, the internal wiring was
followed by other rules.
This enabled the key wheels for the Navy, Air Force, Army,
intelligence and diplomacy, as well as other institutions vary.
An example here would serve the link table of the old "Enigma". It shows
the different wiring of the individual key wheels..
|
Wheel |
ABCDEFGHIJKLMNOPQRSTUVWXYZ |
Notch |
Turnover |
# |
| |
|
ETW |
ABCDEFGHIJKLMNOPQRSTUVWXYZ |
|
|
|
|
I |
EKMFLGDQVZNTOWYHXUSPAIBRCJ |
Y |
Q |
1 |
|
II |
AJDKSIRUXBLHWTMCQGZNPYFVOE |
M |
E |
1 |
|
III |
BDFHJLCPRTXVZNYEIWGAKMUSQO |
D |
V |
1 |
|
IV |
ESOVPZJAYQUIRHXLNFTGKDCMWB |
R |
J |
1 |
|
V |
VZBRGITYUPSDNHLXAWMJQOFECK |
H |
Z |
1 |
|
VI |
JPGVOUMFYQBENHZRDKASXLICTW |
HU |
ZM |
2 |
|
VII |
NZJHGRCXMYSWBOUFAIVLPEKQDT |
HU |
ZM |
2 |
|
VIII |
FKQHTLXOCBJSPDZRAMEWNIUYGV |
HU |
ZM |
2 |
|
Beta |
LEYJVCNIXWPBQMDRTAKZGFUHOS |
|
|
|
|
Gamma |
FSOKANUERHMBTIYCWLQPZXVGJD |
|
|
|
|
UKW-B |
ENKQAUYWJICOPBLMDXZVFTHRGS |
|
|
|
|
UKW-C |
RDOBJNTKVEHMLFCWZAXGYIPSUQ |
|
|
|
aus Crypto Museum Niederlande
For practical applications were 3 ... 10 or
more of these key wheels are threaded in succession on an axis. On this
axis, each wheel could be moved freely, without the previous or
following moving.
This axis with the attached key wheels was
then introduced into the housing of the equipment.
Here, the free-moving wheels were fixed by
mechanical attachments.
The movement of the wheels is now determined
by the control of the mechanical mounts. This particular direction of
rotation and the number of shifts (rotation of the wheel wrench) over
the previous or its successor.
Additionally there are still notches or other
elements that alter the movement of the individual key wheels. The
number of notches and their mathematical boundary conditions, have been
extensively described in the materials on Rotrsystemen.
Through this "chaotic barbed wire" the
electric current of each key is struck is headed.